Skip to main content

Early Wildfire Detection System Using BME688 and LoRa

image info

This project was created as a response to the recurring problem of wildfires in my country, Honduras. Every year, thousands of hectares are lost, and one of the most affected areas is La Tigra National Park. Beyond being a protected biodiversity zone, La Tigra is the main water source for the capital city, so early detection of fire activity is critical.

The project aims to show the viability of a low-cost LoRa-based mesh network capable of monitoring air quality in real time across forested areas. The goal is to detect the early signs of a fire before it becomes large enough to cause irreversible damage.

The idea began with an earlier prototype based on an RP2040, an RTC module, traditional LoRa point-to-point communication, and a Sharp GP2Y smoke sensor. The prototype demonstrated that early smoke detection was possible, but it lacked the characteristics needed for a real deployment: energy efficiency, long communication range, and mesh networking. This led to the new design using the Heltec V3 and the BME688 sensor, which better fits the requirements of a forest-scale deployment. image info

Preparation

Below is the list of items required for the project, with the exact quantities used and the purchase links for replication.

Heltec LoRa WiFi V3 (3-pack)
https://www.amazon.com/dp/B0DMN28TRW

BME688 gas sensor modules
https://www.amazon.com/dp/B0BZ76H645

3000 mAh lithium batteries
https://www.amazon.com/dp/B0D3LP6F8G

SONOFF IP66 waterproof case
https://sonoff.tech/products/sonoff-ip66-waterproof-case

Deployment used:
1x Heltec V3 Sensor Node
1x Heltec V3 Router
1x Heltec V3 Gateway

Implementation process

The project uses one Heltec V3 configured as a sensor node, another as a router, and a third as the receiving gateway. Meshtastic version 2.5.4.8d288d5 was used for the sensor node because it allows shorter telemetry intervals required for this application.

The BME688 sensor is read by the sensor node using the Meshtastic I²C direction pins (GPIO 41 for SDA and GPIO 42 for SCL). The sensor node transmits telemetry over LoRa. The router relays the packets deeper into the mesh, and the gateway node forwards the packets to a local Mosquitto MQTT server. Node-RED processes the incoming data.

Two improvements are proposed for future versions, and these are optional approaches:

Modify Meshtastic firmware to support a pretrained BSEC model on the BME688, trained on clean air and smoke.

Add a secondary microcontroller dedicated to smoke detection logic, sending only the relevant alerts to the V3 via UART.

A third proposal is to replace Meshtastic entirely across the entire system. This would allow the use of a very low-power custom firmware and a communication strategy focused strictly on meeting long-term energy requirements, rather than depending on Meshtastic’s operational model.

Below are the measured average current consumption values:

Router node:
Standby: 11.1 mA
Window after data reception (every 1–3 seconds): approximately 130 mA
During active packet reception: 174 mA

Sensor node:
Standby: 98 mA
During LoRa transmission: 170 mA

All measurements were taken using default Meshtastic roles without deep firmware modifications.

image info image info

Finished project showcase / Summary

Although the system is still under development, The current implementation demonstrates that BME688 gas measurements, can be transmitted through a local LoRa mesh, and forwards the data to an MQTT server for processing. Although the current implementation is simple, it demonstrates that a distributed private mesh can operate reliably in forest environments to support early detection of fire activity.

The main areas for future improvement include:

Replacing the default Heltec antennas with higher-performance long-range models suitable for forest terrain.

Replacing the Heltec V3 with the Mesh Node T114, which offers significantly better energy efficiency and direct solar-panel support.

Implementing intelligent smoke-detection logic using either a modified Meshtastic firmware or independent microcontroller firmware.

A watchdog-like mechanism that detects silent nodes and automatically triggers a fallback alert if communication is lost.

The Node-RED flow is expected to provide visualization of system states, warnings, and alarms, helping users understand environmental changes in real time and act if needed.

The project shows that early wildfire detection using low-cost mesh networks is achievable and practical. With further optimization and better energy management, these systems can be deployed across large protected areas to help prevent major environmental losses.

image info

Christmas gifts and 2026 new years

December 23, 2025​ – As Christmas bells ring in and the New Year approaches, Heltec Automation, a globally leading provider of IoT and open-source hardware solutions, today announced the launch of its annual "Christmas Gifts, New Year Ideas" dual-festival promotion. The campaign will warmly begin on December 24, 2025, and run through January 5, 2026. Designed as a special seasonal gift for the global developer and maker community, this promotion features carefully structured tiered discounts, aiming to help every innovator equip themselves with the ideal "tools for creation" during this festive season and step confidently into their 2026 projects.

LoRa Gate PCB – WLED-Powered LED Gates with Heltec HT-CT62

The LoRa Gate PCB is a custom controller board for wireless, battery-powered LED gates, built around the Heltec HT-CT62 module (ESP32-C3 + SX1262 LoRa). It is designed for applications where multiple LED “nodes” need to be controlled reliably over long distances with minimal wiring – for example FPV race start/finish gates, illuminated track elements, or interactive light installations.

The board combines WLED, LoRa and a robust power stage into a compact, production-ready form factor.


Idea​

Race Image

LoRaHunt - Monitoring live traps for invasive species

image info

Invasive species introduced by humans threaten native fauna and flora through their unchecked spread. Therefore, invasive species must be monitored and, if necessary, relocated. LoRaHunt is a project to monitor the live traps required for this purpose.

From a LoRa communication module to a safe text message

Recently, Heltec received a special letter. The sender was Lenley Ngo from Louisiana, USA, a key maintainer of the "Louisiana Mesh Community." The letter described how hurricanes repeatedly destroyed cellular networks, separating families and hindering rescue efforts. "Our only means of communication is walkie-talkies, and cellular network repairs will take weeks," Lenley wrote. The letter didn't make many requests, but rather conveyed a heavy responsibility and a clear plan: to use decentralized mesh networks to leave a lifeline for the most dangerous times. Today, Heltec solemnly announces: we will support the Louisiana Mesh Community, becoming the technical backbone for these "guardians in the storm."

Shipping and warehouse policy

Welcome to our shipping and warehouse policy! We aim to provide fast and reliable delivery worldwide. Below you will find all the necessary information about our general guidence, warehouse and supported countries, and customs policies.

General Shipping Guidance​

1. Accurate Shipping Details Required: Please ensure your shipping address and postal/ZIP code are entered using standard English letters and numerals only. Inaccurate or non-standard formats may delay processing.

note

To comply with customs regulations, customers shipping to Brazil, India, Mexico, Russia, and Turkey must provide a valid local Tax ID (e.g., CPF, GSTIN, RFC, INN, etc.) at checkout. Unable to provide this will result in shipment rejection or return.


2. Review Your Order Before Payment:We currently do not offer a grace period for editing orders after placement — please double-check all items, quantities, and shipping details before confirming payment. Due to system automation and time zone differences, you may face with delays.

3. Inspect Upon Delivery: In accordance with international courier standards, we strongly recommend inspecting your package for visible damage before signing for receipt. If damage is apparent, refuse delivery or note it with the carrier. Claims for transit damage cannot be accepted if the package was signed for without documented inspection.

4. Customs Duties and Taxes:All import duties, taxes, customs fees, and related charges levied by your country’s government are solely the responsibility of the customer. These fees are not included in your order total and are not controlled by us.

Additionally, we are legally required to collect certain taxes (including VAT, sales tax, or withholding tax) where applicable under local law. Such amounts will be calculated and added to your order at checkout — you are responsible for their payment.

5. Priority Fulfillment Based on Location While you may select a preferred warehouse during checkout, we will always prioritize shipping your order from the nearest available warehouse to your location to minimize transit time.

6. Split Shipments If your order contains items sourced from different inventory locations (warehouses), the items will be shipped separately and will arrive in multiple packages with individual tracking numbers and may arrive on different days.

7. Regional Restriction

  • Orders from the US Warehouse can only be shipped to the US supported states.
  • Orders from the German Warehouse can only be shipped to the supported countries.
note

If no regional warehouse supports your location, your entire order will be fulfilled and shipped from our China Global Warehouse.


8. High Cost and Inspection Risk on Battery Goods Express shipping channels for battery products incur significantly higher shipping fees and are subject to an increased rate of customs inspection due to strict aviation safety regulations.

Regional Warehouses and Supported Counties​

German Warehouse Supported Countries:​

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

US Warehouse Supported States/Regions:​

South Alabama, Arkansas, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, West Virginia.

Midwest Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, Pennsylvania, South Dakota, Wisconsin.

West Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming.

Northest Connecticut, District of Columbia, Maine, Massachusetts, New Hampshire, New Jersey, New York, Rhode Island, Vermont.

note

Not Supported from US Warehouse: Alaska, Hawaii, Puerto Rico.


Shipping Methods on platforms and Carriers

We utilize various carriers to ensure global reach and cost efficiency. Shipping costs depend on the weight and chosen method. The exact cost and delivery time will be calculated at the checkout page.

PlatformProduct TypeCarriers
AmazonGeneral / Integrated BatteryYanWen, YunTu, FeiE
AliExpressGeneral / Integrated BatteryYunTu, DingLiTong
All PlatformsPure BatteryDingLiTong, ZhongBai, FedEx, DHL
Official SiteExpress (Battery/general)FedEx, DHL, ZhongBai
Official Site (Russia)GeneralChina Post Shenzhen offline ePacket
note

All channels and platforms listed above refer to orders placed directly operated stores, and not through any third-party resellers or agents.


We reserve the right to update or revise this Shipping & Warehouse Policy at any time to reflect changes in our operations, shipping practices, carrier requirements, or applicable laws and regulations. The latest version will always be posted on this page, and continued use of our website after any updates constitutes your acceptance of the revised policy.

For further assistance, contact us at Discord or email to [support@heltec.com] or visit our forum.

Last Updated: Dec 2025

LoRa Tracking in the Mountains

Imagine this: you need to track 40 athletes in real-time over a 250 km distance in the mountains, where there isn't a single cell tower in sight. That was the exact challenge I faced at the RusXFly paragliding race. In this article, I'll tell you how we solved it with LoRa, Heltec modules, and a whole lot of enthusiasm.

Building a life line in the storm

On October 5, 2025– A significant communications experiment took place on the island of La Réunion in the Indian Ocean. The Gaulix network, a local communication system based on the Meshtastic open-source protocol and LoRa technology, successfully completed its first large-scale island-wide test.

Designed to provide a vital information lifeline for residents when traditional networks fail during extreme weather events such as hurricanes, the initiative represents a major step towards community resilience. Heltec, a provider of LoRa devices and Lora solutions, proudly supported this visionary community-led project with its hardware and technical expertise.