Skip to main content

Frequently Asked Questions

This page contains the most frequently questions from user. If this page's detail can't solve your problem, you can also talk in our forum: community.heltec.cn

Can't Download Firmware​

  • Use a better USB cable, or change a USB socket
  • Check and make sure the CP210x drive had been correctly installed, users can refer to this document: Establish Serial Connection
  • Press "PRG" button before upload

Node to node communication​

On the premise of no hardware problem, LoRa nodes can communicate with each other node-to-node. The key to success node-to-node communication need make sure the following 7 points the same:

  1. The same sending and listening frequency: LoRa.setFrequency(frequency)
  2. The same bandwidth: LoRa.setSignalBandwidth(signalBandwidth)
  3. The same coding rate: LoRa.setCodingRate4(codingRateDenominator)
  4. The same preamble length: LoRa.setPreambleLength(preambleLength)
  5. The same sync word: LoRa.setSyncWord(syncWord)
  6. The status of LORA_IQ_INVERSION is the same
  7. the same SPREADING FACTOR

Know more information about LoRa node-to-node communication, please refer to LoRa basic library APIs: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/src/lora/API.md

Meshtastick​

The device uses the firmware of Wireless Stick Lite, it does not have a display function.